Products
-
Pair of RAD-1 Hoops, Soft Firmness 62-Shore (Dark Grey - Hoops Only)
Replacement pair of soft firmness, Dark Edition (dark grey) RAD-1 hoops for use with any RAD mount base or Radius windshield blimp. Hoops only (mic holder clips sold separately). Comes with 4 mounting screws - 8mm long (fits base and tops). Hoops have a flat top and are recommended to be used with smaller condenser mics. Screws included
€21,78
-
Pair of RAD-1 Hoops, Standard Firmness (Black)
Pair of RAD-1 Hoops in standard firmness (black). These hoops provide optimal suspension for most condenser and shorter directional microphones. The RAD-1 hoops are best used indoors with the mic by itself or the mic with a foam. These hoops will fit in all RAD shock mount top brackets. This product consists of isolation hoops and screws only - does not come fitted with mic clips.
€21,78
-
Pair of RAD-2 Hoops, Extra Firm 82-Shore (Dark Blue - Hoops Only)
Replacement pair of extra firm (dark blue) RAD-2 hoops for use with any RAD mount base or Radius windshield blimp. Hoops only (mic holder clips sold separately). Hoops have 3mm spine / bracing on top for use with longer or front-heavy mics. Comes with 4 mounting screws - 2 x 8mm long (for base) and 2 x 12mm long (for tops) Suitable for heavier/longer microphones like the Sennheiser MKH 416, MKH60 & Schoeps CMIT 5U. Screws included
€21,78
-
Pair of RAD-2 Hoops, Extra Soft 55-Shore (Dark Green - Hoops Only)
Replacement pair of 55-Shore extra soft (dark green) RAD-2 hoops for use with any RAD mount base or Radius windshield blimp. Hoops only (mic holder clips sold separately).
€21,78
-
Pair of RAD-2 Hoops, Soft Firmness (Light Blue)
Pair of RAD-2 Hoops in soft firmness (light blue). These hoops provide a softer microphone suspension than standard hoops (black). The extra bracing along the top allows for use with longer mics or when using a slide-on windshield on the front. These hoops will fit in all RAD shock mount top brackets. This product consists of isolation hoops and screws only - does not come fitted with mic clips.
€21,78
-
Pair of RAD-2 Hoops, Soft Firmness 62-shore (Dark Grey - Hoops Only)
Replacement pair of soft firmness, Dark Edition (dark grey) RAD-2 hoops for use with any RAD mount base or Radius windshield blimp. Hoops only (mic holder clips sold separately). Hoops have 3mm spine / bracing on top for use with longer or front-heavy mics. Comes with 4 mounting screws - 2 x 8mm long (for base) and 2 x 12mm long (for tops) Screws Included
€21,78
-
Pair of RAD-2 Hoops, Standard Firmness (Black)
Pair of RAD-2 Hoops in standard firmness (black). These hoops provide optimal suspension for most shotgun microphones. The extra bracing along the top prevents front sagging when using longer mics or when using a slide-on windshield. These hoops will fit in all RAD shock mount top brackets. This product consists of isolation hoops and screws only - does not come fitted with mic clips.
€21,78
-
Puffer Urchin Lav windshield, Foam Core, Black - Single/Pair
The Puffer Urchin Lav windshields are made to fit miniature lavalier mics 2-4mm in diameter. The Puffer Urchins are made from synthetic black fur with a built in foam core for added wind protection. These have a low profile that is approximately 35mm across from end-to-end. Puffer Urchins provide great protection for outdoor ENG interviews or other situations where the lav mics are exposed to more wind. These also have a unique blue "safety strap" which holds the fur firmly in place. We sell these as a SINGLE pack or a PAIR.
€21,78 - €39,93
-
RAD Cable Straps (10 Pack)
Pack of 10 Radius brand "light blue" or "Black" cable straps made from high quality TPE silicone-based polymer that is latex free. The cable straps are designed to replace noisy or scratchy hook & loop straps. Perfect for: Cable Management Organization with Wires/cords Attaching to Boom Poles Attaching to Shock Mounts General cable organisation. The straps have a "cable-stay" side which locks the strap into place on the cable so it doesn't fall off. Each pack contains 10 cable straps: 5 x straps that are 60mm long 5 x straps that are 100mm long. Choose between Black or Light Blue. These cable straps are MADE IN THE U.K.
€14,52
-
RAD Low Profile 3-Pin XLR Cable (275mm)
This low profile 3-Pin XLR jumper cable is made to fit all RAD shock mounts. The cable itself is 275mm long and has a 90-degree female XLR connection and straight male XLR connection. The cable length and width are designed to fit in the RAD shock mount cable footings with additional slack for strain relief and repositioning of microphones.
€60,50
-
RAD Mount Boom Adaptor w/ 360 XLR Holder
RAD Mount boom adaptor with 360 XLR holder can be purchased as a replacement for a RAD-1/2 or to convert a RAD-3 mount into a a boom mount without the handle. Boom adaptor works with all RAD mounts. Simply screw on using the thumbwheel attached to the RAD top bracket. Comes with 360-degree XLR holder 3/8 threaded base to fit on boom poles or stands XLR holder turns in both directions. Screw tightly onto boom pole or stand to lock it into place. Bottom boom mount adaptor and XLR holder only. Other RAD mount parts sold separately.
€36,30
-
RAD Mount Pistol Grip Handle
The RAD Mount Pistol Grip Handle is designed to attach to the RAD Mount top bracket and thumbwheel. This handle can be swapped out with a RAD-1 or RAD-2 boom adaptor to use for handheld recording. It also has a 3/8 threaded bottom so it can fit on boom poles, stand or used with a quick-connect attachment. The handle has a rubber coated embedded XLR holder with a rubber safety strap to keep the XLR socket securely fitted inside.
€36,30
-
RAD Mount Replacement 360 XLR Holder
Replacement 360-degree XLR holder attachment for RAD mount boom adaptor. Removable from RAD mount boom adaptor. Unique design only works with RAD Mount boom adaptors. Snugly holds the XLR stem with a thumbwheel screw to tightly lock in place.
€30,25
-
RAD Mount Top Bracket w/ Thumbwheel
Top swivel arm bracket for all styles of RAD mounts with thumbwheel screw attached. This is the central piece to the RAD mounts that all other main components attach to (isolation hoops, boom adaptor or pistol grip handle). Top bracket for mounting RAD isolation hoops onto Features offset 'claw feet' on the side to hold XLR cable and provide strain relief Fixed in place thumbwheel screw can be used to attach a RAD boom adaptor or pistol grip handle
€36,30
-
RAD XLR Cable with Lemo Connector (Length: 275mm)
A Lemo-to-XLR Cable designed to fit with the RAD-1 Shock Mount for Schoeps CCM, CMC1-L and CMC1-K microphones/Users/megan/Downloads/RAD-01442 RAD-1 Sock Mount, CCM-CMC Edition w LEMO-XLR Cable Image4.jpg Length: 275mm length Fits with Schoeps CCM, CMC1-L and CMC1-K
€145,20
-
RAD-1 Shock Mount
The RAD-1 Shock Mounts are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (light blue) -- so you can get the best isolation for your style of booming. The base of this mount comes with a 360-degree rotatable XLR holder and 3/8 thread to use on boom poles, stands or with quick-connect attachments. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation for small, sensitive microphones Recommended for use with short shotgun, omni, cardioid and super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen 2 pairs of interchangeable RAD-1 hoops are included - standard firmness (black) and soft firmness (light blue) Comes with 360-degree rotatable XLR holder NOTE: XLR jumper cable not included
€102,85
-
RAD-1 Shock Mount with 3-Pin XLR Cable
This RAD-1 Shock Mount comes with a low profile 3-Pin XLR jumper cable included. The RAD-1 Shock Mounts are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (light blue) -- so you can get the best isolation for your style of booming. The base of this mount comes with a 360-degree rotatable XLR holder and 3/8 thread to use on boom poles, stands or with quick-connect attachments. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory. The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation for small, sensitive microphones Recommended for use with short shotgun, omni, cardioid and super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen 2 pairs of interchangeable RAD-1 hoops are included - standard firmness (black) and soft firmness (light blue) Comes with 360-degree rotatable XLR holder and XLR jumper cable
€145,20
-
RAD-1 Shock Mount, CCM/CMC Edition
The RAD-1 Shock Mount, CCM/CMC Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with Schoeps CCM and Collette series microphones, including the CMD 42. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming. The mount comes fitted with two dark grey rubber coated universal mic clips and an extra 8mm black coloured rear mic clip for Lemo connectors. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Compatibility: Schoeps CCM microphones and capsules with amplifiers CMC1-U, CMC1-L and CMC1-K. Also recommended for use with CMC6, CMC6-XT, CMC6/CUT60 and CMD42 when using a standard mic foam for wind protection (use a RAD-2 with heavier slide on wind protection). Comes fitted with two dark grey rubber coated mic clips and an extra 8mm uncoated mic clip for use with Lemo connectors. Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey)
€102,85
-
RAD-1 Shock Mount, CCM/CMC Edition w/ Lemo-XLR Cable
The RAD-1 Shock Mount, CCM/CMC Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with Schoeps CCM and Collette series microphones, including the CMD 42. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming. The mount comes fitted with two dark grey rubber coated universal mic clips and an extra 8mm black coloured rear mic clip for Lemo connectors. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) - so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). A 200mm long Lemo to XLR cable is included. The RAD Shock Mounts are made in England.
€242,00
-
RAD-1 Shock Mount, Dark Edition
The RAD-1 Shock Mounts, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips (in dark grey colour) to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation in an all matte black & grey colour. NO XLR CABLE. Suitable to cardioid & super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey)
€102,85
-
RAD-1 Shock Mount, Dark Edition with 3-Pin XLR Cable
The RAD-1 Shock Mounts, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips (in dark grey colour) to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation in an all matte black & grey colour Suitable to cardioid & super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey) 3-Pin XLR cable included
€145,20
-
RAD-1 Shock-Mount, MKH50 Edition
The RAD-1 Shock Mount, MKH50 Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with a Sennheiser MKH50. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming. The mount has uncoated square MKH mic clips (in black colour) to fit square body mics. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great isolation to remove low-end handling noise when booming with an MKH50 in an all matte black & grey colour. Comes fitted with MKH clips designed to fit square body microphones Fits Sennheiser MKH50 Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey)
€102,85
-
RAD-1 Shock-Mount, MKH50 Edition with 3-Pin XLR Cable
The RAD-1 Shock Mount, MKH50 Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with a Sennheiser MKH50. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming. The mount has uncoated square MKH mic clips (in black colour) to fit square body mics. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great isolation to remove low-end handling noise when booming with an MKH50 in an all matte black & grey colour. Comes fitted with MKH clips designed to fit square body microphones Fits Sennheiser MKH50 Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey) 3-Pin XLR cable included
€145,20
-
RAD-2 Camera Shoe Microphone Shock Mount
The RAD-2 Camera Shoe Shock Mounts are designed for for use with standard length shotgun microphones and small condenser pencil microphones used on cameras. It provides exceptional isolation from movement, handling noise and other vibrations. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) mounted to a machined aluminium bracket design in partnership with our friends at MID49. The ratcheting shoe lock ensures a secure fit on cameras and other quick connects such as ARRI adaptors which accept the square shoe plates. Excellent handling noise isolation for mics mounted to cameras Universal rubber coated mic clips fit microphones 19-25mm in diameter Ratcheting shoe lock ensures secure fit and easy on/off. Mount can be reversed 180-degrees to move mic further backwards, keeping the front of the mic or fur wind cover away from the lens and out of shot. Fits Rode VideoMic NTG, Rode NTG-5, Rode NTG-3, Rode NTG-4, Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Sanken CS-M1, DPA 2017, DPA 4017C and other similar sized microphones
€108,90
You have seen 96 out of 105 products