Products
-
10cm Nimbus Windshield (19/22)
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits many camera microphones like: Sony ECM-XM1, HDV Z7; JVC MV-P615 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 10cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€84,70
-
10cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Fits older model camera microphones like: Sony ECM-XM1, HDV Z7; JVC MV-P615 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 10cm from end of mic Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Made from high quality acoustic synthetic fur with a porous open cell foam core Sony ECM-XM1, HDV Z7; JVC MV-P615
€84,70
-
10cm Shotgun Mic Foam (19/22)
The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits: JVC GY HD 200; JVC MV-P615U; Sony ECM-XM1; Sony ECM-CG1 Fits other short shotgun and camera microphones 19-22mm in diameter, with slots less than 10cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
€21,78
-
12cm Nimbus Windshield (19/22)
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Audio-Technica AT875R, BP4073; DPA 4017; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 12cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€84,70
-
12cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Fits: Audio-Technica AT875R, BP4073; DPA 4017; Schoeps MiniCMIT; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 12cm from end of mic Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Made from high quality acoustic syntethic fur with a porous open cell foam core Audio-Technica AT875R, BP4073; DPA 4017; Schoeps MiniCMIT; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1
€84,70
-
12cm Shotgun Mic Foam (19/22)
The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits other short shotgun and camera microphones 19-22mm in diameter, with slots less than 12cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
€21,78
-
15cm Nimbus Windshield (19/22)
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Schoeps CMIT 5 U; Sennheiser MKE600 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 15cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€91,96
-
15cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Schoeps CMIT 5 U; Sennheiser MKE600 Fits other small shotgun microphones 19-22mm in diameter and with slots less than 15cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€91,96
-
15cm Shotgun Mic Foam (19/22)
The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Sennheiser MKE600; Schoeps CMIT 5 Fits other shotgun microphones 19-22mm in diameter, with slots less than 15cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
€26,62
-
18cm Nimbus Windshield (19/22)
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Rode NTG-3; Sanken CS-3e; Sennheiser ME66 K6, MKH416, MKH418-S; Sony ECM-678, ECM-680S Fits other shotgun microphones 19-22mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€91,96
-
18cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Rode NTG-3; Sanken CS-3e; Sennheiser ME66 K6, MKH416, MKH418-S; Sony ECM-678, ECM-680S Fits other shotgun microphones 19-22mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€91,96
-
18cm Nimbus Windshield (24/25) for Sennheiser MKH60
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits Sennheiser MKH60 and other shotgun microphones 24-25mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€91,96
-
18cm Nimbus Windshield (24/25), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits Sennheiser MKH60 and other shotgun microphones 24-25mm in diameter and with slots less than 18cm from end of mic Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€91,96
-
18cm Shotgun Mic Foam (19/22)
The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits other shotgun microphones 19-22mm in diameter, with slots less than 18cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
€26,62
-
3.5cm Handheld Mic Foam (50mm Børe)
The Radius range of handheld microphone foams are made from high-quality acoustic foam designed to prevent plosives, hand movement swooshes and other very light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. Compatible with: Audio-Technica AT8004, Rode Reporter, Sennheiser e845, Electro-Voice 635 Mic foams protect against plosives, swooshes and light wind noise Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture Dimensions: 35mm x 55mm Internal Hole Size
€18,15
-
3cm Handheld Mic Foam (55mm Børe)
The Radius range of handheld microphone foams are made from high-quality acoustic foam designed to prevent plosives, hand movement swooshes and other very light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. Compatible with: Shure SM57, Shure SM63, Shure VP64 Mic foams protect against plosives, swooshes and light wind noise Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture Dimensions: 30mm x 55mm Internal Hole Size
€18,15
-
4cm Handheld Mic Foam (55mm Børe)
The Radius range of handheld microphone foams are made from high-quality acoustic foam designed to prevent plosives, hand movement swooshes and other very light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. Compatible with: Electro-Voice RE-50, Neumann KMS 104/105, Sennheiser e835, Shure SM58 Mic foams protect against plosives, swooshes and light wind noise Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture Dimensions: 40mm x 55mm Internal Hole Size
€21,78
-
5cm Mic Foam (19/22)
The Radius range of condenser and shotgun microphone foams are made from high-quality acoustic foam designed to prevent plosives, boom swings swooshes and other light wind noise, whilst not interfering with high frequency audio capture. These are not the typical cheap mic foams that turn to dust in your fingers and fade away fast. Radius foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture. For shotgun microphones, the tapered foam is wider in the back to provide more side wind protection around the capsule. The foam narrows toward the front to provide additional protection around the interference tube whilst allowing for maximum transparency. These foams come in 3 internal diameter sizes and a variety of lengths to fit many broadcast, camera and recording microphones. Mic foams protect against plosives, swooshes and light wind noise Fits other small pencil condenser and instrument microphones 19-22mm in diameter, with slots less than 5cm from end of mic Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
€18,15
-
5cm MKH50 Mushroom Mic Foam, 24/25
The Radius MKH50 Mushroom Mic Foam (24/25) is a designed to fit the MKH50 and other 24-25mm diameter microphones when used with a RAD shock mount or other style mount. The mic has a thick circular end around the capsule and a thinner "stem" to provide more grip around the body of the mic. Inside, there is cavity (ø40mm) that creates dead air space around the capsule. We have also added a non-slip silicone to the entrance of each foam, to help prevent the foams from slipping off. Each foam can be found with or without the fur windcover too - giving you that little bit extra wind protection! All our foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture.
€21,78 - €48,40
-
5cm MKH50 Nimbus Windshield (24/25)
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Sennheiser MKH20, MKH30, MKH40, MKH50; Sony ECM-MS2 Fits other small pencil condenser and instrument microphones 24-25mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€78,65
-
5cm MKH50 Nimbus Windshield (24/25), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: Sennheiser MKH20, MKH30, MKH40, MKH50; Sony ECM-MS2 Fits other small pencil condenser and instrument microphones 24-25mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€78,65
-
5cm Mushroom Mic Foam, 19/22
Shaped like an actual mushroom, our newest foam is designed for smaller mics like the DPA Microphones 4018C, Sennheiser MKH 8050 and Schoeps CMC6-41. The idea behind the step down on the foam shape, is to allow it to be pushed close to the front hoop of the shock mount. This also helps to retain the optional fur cover too. Inside, there is cavity (ø40mm) that creates dead air space around the capsule. We have also added a non-slip silicone to the entrance of each foam, to help prevent the foams from slipping off. Each foam can be found with or without the fur windcover too - giving you that little bit extra wind protection! All our foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture.
€21,78 - €48,40
-
5cm Nimbus Windshield (19/22)
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: AKG C451; AudioTechnica AT4022, BP3600; Beyerdynamic MC930, MC950; DPA 4006A, 4011A, 4015A, 4018A; Neumann KM184; Rode NT5, NT55; Schoeps CMC6 + MK4, MK5 or MK41 Fits other small pencil condenser and instrument microphones 19-22mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps (make sure there is enough room behind the capsule and in front of the mic mount to slide Nimbus on) Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€78,65
-
5cm Nimbus Windshield (19/22), Black Fur
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity. The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur. Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency Fits: AKG C451; AudioTechnica AT4022, BP3600; Beyerdynamic MC930, MC950; DPA 4006A, 4011A, 4015A, 4018A; Neumann KM184; Rode NT5, NT55; Schoeps CMC6 + MK4, MK5 or MK41 Fits other small pencil condenser and instrument microphones 19-22mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps (make sure there is enough room behind the capsule and in front of the mic mount to slide Nimbus on) Made in England from high quality acoustic synthetic fur with a porous open cell foam core
€78,65
You have seen 24 out of 105 products