RAD Shock Mount

The RAD-1 Shock Mounts are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (light blue) -- so you can get the best isolation for your style of booming. The base of this mount comes with a 360-degree rotatable XLR holder and 3/8 thread to use on boom poles, stands or with quick-connect attachments. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation for small, sensitive microphones Recommended for use with short shotgun, omni, cardioid and super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen 2 pairs of interchangeable RAD-1 hoops are included - standard firmness (black) and soft firmness (light blue) Comes with 360-degree rotatable XLR holder NOTE: XLR jumper cable not included

Read more less

This RAD-1 Shock Mount comes with a low profile 3-Pin XLR jumper cable included. The RAD-1 Shock Mounts are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (light blue) -- so you can get the best isolation for your style of booming. The base of this mount comes with a 360-degree rotatable XLR holder and 3/8 thread to use on boom poles, stands or with quick-connect attachments. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory. The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation for small, sensitive microphones Recommended for use with short shotgun, omni, cardioid and super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen 2 pairs of interchangeable RAD-1 hoops are included - standard firmness (black) and soft firmness (light blue) Comes with 360-degree rotatable XLR holder and XLR jumper cable

Read more less

The RAD-2 Shock Mounts are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (light blue) and a pair of extra firm hoops (dark blue). The RAD-2 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great microphone shock mount isolation when booming indoors, outdoors or on run-&-gun shoots Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones Also use the RAD-2 with super-cardioid, cardioid and omni condenser mics when using a slide-on Radius Nimbus Windshield or other style deadcat fur on the front. Comes with 360-degree rotatable XLR holder and 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (light blue) and extra firm (dark blue) NOTE: XLR jumper cable not included

Read more less

The RAD-2 Shock Mounts are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (light blue) and a pair of extra firm hoops (dark blue). The RAD-2 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great microphone shock mount isolation when booming indoors, outdoors or on run-&-gun shoots Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones Also use the RAD-2 with super-cardioid, cardioid and omni condenser mics when using a slide-on Radius Nimbus Windshield or other style deadcat fur on the front. Comes with 360-degree rotatable XLR holder and 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (light blue) and extra firm (dark blue) 3-Pin XLR jumper cable included

Read more less

The RAD-3 Shock Mounts are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. The RAD-3 mounts provide the same isolation and support as the RAD-2, but come with a pistol grip handle instead of a boom adaptor. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (light blue) and a pair of extra firm hoops (dark blue). The RAD-3 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great microphone shock mount isolation when booming indoors, outdoors or on run-&-gun shoots Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones Also use the RAD-2 with super-cardioid, cardioid and omni condenser mics when using a slide-on Radius Nimbus Windshield or other style deadcat fur on the front. Comes with a pistol grip handle and embedded XLR holder instead of a boom adaptor. The handle has a 3/8 threaded bottom so it can also be attached to boom poles and stands. Also comes with 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (light blue) and extra firm (dark blue). NOTE: XLR jumper cable not included

Read more less

The RAD-1 Shock Mount, MKH50 Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with a Sennheiser MKH50. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming.  The mount has uncoated square MKH mic clips (in black colour) to fit square body mics. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great isolation to remove low-end handling noise when booming with an MKH50 in an all matte black & grey colour.  Comes fitted with MKH clips designed to fit square body microphones Fits Sennheiser MKH50 Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey)

Read more less

The RAD-1 Shock Mount, MKH50 Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with a Sennheiser MKH50. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming.  The mount has uncoated square MKH mic clips (in black colour) to fit square body mics. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great isolation to remove low-end handling noise when booming with an MKH50 in an all matte black & grey colour.  Comes fitted with MKH clips designed to fit square body microphones Fits Sennheiser MKH50 Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey) 3-Pin XLR cable included

Read more less

The RAD-1 Shock Mount, CCM/CMC Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with Schoeps CCM and Collette series microphones, including the CMD 42. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming. The mount comes fitted with two dark grey rubber coated universal mic clips and an extra 8mm black coloured rear mic clip for Lemo connectors. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Compatibility: Schoeps CCM microphones and capsules with amplifiers CMC1-U, CMC1-L and CMC1-K. Also recommended for use with CMC6, CMC6-XT, CMC6/CUT60 and CMD42 when using a standard mic foam for wind protection (use a RAD-2 with heavier slide on wind protection). Comes fitted with two dark grey rubber coated mic clips and an extra 8mm uncoated mic clip for use with Lemo connectors. Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey)

Read more less

The RAD-1 Shock Mount, CCM/CMC Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with Schoeps CCM and Collette series microphones, including the CMD 42. This suspension provides exceptional isolation from movement, low-end handling noise and other vibrations associated with booming.  The mount comes fitted with two dark grey rubber coated universal mic clips and an extra 8mm black coloured rear mic clip for Lemo connectors. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) - so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). A 200mm long Lemo to XLR cable is included. The RAD Shock Mounts are made in England.

Read more less

The RAD-1 Shock Mounts, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips (in dark grey colour) to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation in an all matte black & grey colour. NO XLR CABLE. Suitable to cardioid & super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey)

Read more less

The RAD-1 Shock Mounts, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed to be used with short shotgun and small condenser pencil microphones (super-cardioid, cardioid and omni). This suspension provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips (in dark grey colour) to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) and a pair of softer hoops (dark grey) -- so you can get the best isolation for your style of booming. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Our highest level of microphone shock mount isolation in an all matte black & grey colour Suitable to cardioid & super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length Fits Schoeps CCM & CMC Series, Sennheiser MKH50, Sennheiser MKH8020, Sennheiser MKH8040, Sennheiser MKH8050, DPA 4018, Neumann KM 100 and other small pencil condenser microphones Suitable primarily for indoor use or outdoors with no winds when using the mic by itself or the mic with only a foam windscreen Comes with 360-degree rotatable XLR holder and 2 pairs of interchangeable RAD-1 hoops included - standard firmness (black) and soft firmness (dark grey) 3-Pin XLR cable included

Read more less

The RAD-2 Shock Mount, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (dark grey) and a pair of extra firm hoops (dark blue). The RAD-2 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Comes with 360-degree rotatable XLR holder and 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (dark grey) and extra firm (dark blue) Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones

Read more less

The RAD-2 Shock Mount, Dark Edition comes in an all black & grey matte finish with no blue colour on the hoops or mic clips. They are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (dark grey) and a pair of extra firm hoops (dark blue). The RAD-2 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Comes with 360-degree rotatable XLR holder and 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (dark grey) and extra firm (dark blue) Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones 3-Pin XLR cable included

Read more less

The RAD-2 Field Edition Shock Mounts are designed for use with small condenser microphones used on stands or other mounts for field recording. It provides exceptional isolation from movement and other vibrations. The Field Edition mount comes with 3 sizes of mic clips -- a pair of 19-21mm clips, a pair of 12.5-14.5mm clips and an individual 8mm (for Lemo or MZL connectors). Each mount also includes 3 pairs of suspension hoops with different levels of firmness -- standard, soft and extra soft. The suspension hoops can be spaced at 25mm or 15mm apart on the mounting bracket. The bracket also has a cable retention clip at the base and an optional one that can be mounted on the top. The mount has a 3/8 female threaded base. The Field Edition mounts are made from virtually indestructible material. Made in the U.K.

Read more less

The RAD-2 Camera Shoe Shock Mounts are designed for for use with standard length shotgun microphones and small condenser pencil microphones used on cameras. It provides exceptional isolation from movement, handling noise and other vibrations. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black) mounted to a machined aluminium bracket design in partnership with our friends at MID49. The ratcheting shoe lock ensures a secure fit on cameras and other quick connects such as ARRI adaptors which accept the square shoe plates. Excellent handling noise isolation for mics mounted to cameras Universal rubber coated mic clips fit microphones 19-25mm in diameter Ratcheting shoe lock ensures secure fit and easy on/off. Mount can be reversed 180-degrees to move mic further backwards, keeping the front of the mic or fur wind cover away from the lens and out of shot. Fits Rode VideoMic NTG, Rode NTG-5, Rode NTG-3, Rode NTG-4, Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Sanken CS-M1, DPA 2017, DPA 4017C and other similar sized microphones

Read more less

The RAD-3 Shock Mounts are designed for for use with standard length shotgun microphones and small condenser pencil microphones with slide-on fur windshields on the front. The RAD-3 mounts provide the same isolation and support as the RAD-2, but come with a pistol grip handle instead of a boom adaptor. It provides exceptional isolation from movement, handling noise and other vibrations associated with booming. The mount has soft-coated universal mic clips to fit any mic 19-25mm in diameter. Each mount includes a pair of standard firmness hoops (black), a pair of softer hoops (light blue) and a pair of extra firm hoops (dark blue). The RAD-3 hoops are slightly thicker than RAD-1 hoops and have an extra 3mm of bracing on top to hold the extra weight of front-heavy microphones. All of the components are produced using virtually indestructible thermoplastic elastomers from high-precision injection moulding in an ISO-9000 certified factory (no 3D printing here). The RAD Shock Mounts are made in England. Great microphone shock mount isolation when booming indoors, outdoors or on run-&-gun shoots Recommended for use with shotgun microphones with a diameter of 19-25mm, up to 250mm in length. Can be used indoors and outdoors with or without slide-on windshields. Fits Sennheiser MKH416, Sennheiser MKH8060, Sennheiser MKE600, Schoeps CMIT 5, Schoeps SuperCMIT, Schoeps MiniCMIT, Sanken CS-3, Rode NTG-3, DPA 2017, DPA 4017 and other shotgun microphones Also use the RAD-2 with super-cardioid, cardioid and omni condenser mics when using a slide-on Radius Nimbus Windshield or other style deadcat fur on the front. Comes with a pistol grip handle and embedded XLR holder instead of a boom adaptor. The handle has a 3/8 threaded bottom so it can also be attached to boom poles and stands. Also comes with 3 pairs of interchangeable RAD-2 hoops included - standard firmness (black), soft firmness (light blue) and extra firm (dark blue). 3-Pin XLR jumper cable included

Read more less

This low profile 3-Pin XLR jumper cable is made to fit all RAD shock mounts. The cable itself is 275mm long and has a 90-degree female XLR connection and straight male XLR connection. The cable length and width are designed to fit in the RAD shock mount cable footings with additional slack for strain relief and repositioning of microphones.

Read more less

A Lemo-to-XLR Cable designed to fit with the RAD-1 Shock Mount for Schoeps CCM, CMC1-L and CMC1-K microphones/Users/megan/Downloads/RAD-01442 RAD-1 Sock Mount, CCM-CMC Edition w LEMO-XLR Cable Image4.jpg Length: 275mm length Fits with Schoeps CCM, CMC1-L and CMC1-K

Read more less

The RAD Mount Pistol Grip Handle is designed to attach to the RAD Mount top bracket and thumbwheel. This handle can be swapped out with a RAD-1 or RAD-2 boom adaptor to use for handheld recording. It also has a 3/8 threaded bottom so it can fit on boom poles, stand or used with a quick-connect attachment. The handle has a rubber coated embedded XLR holder with a rubber safety strap to keep the XLR socket securely fitted inside. 

Read more less

Top swivel arm bracket for all styles of RAD mounts with thumbwheel screw attached. This is the central piece to the RAD mounts that all other main components attach to (isolation hoops, boom adaptor or pistol grip handle). Top bracket for mounting RAD isolation hoops onto Features offset 'claw feet' on the side to hold XLR cable and provide strain relief Fixed in place thumbwheel screw can be used to attach a RAD boom adaptor or pistol grip handle

Read more less

RAD Mount boom adaptor with 360 XLR holder can be purchased as a replacement for a RAD-1/2 or to convert a RAD-3 mount into a a boom mount without the handle.  Boom adaptor works with all RAD mounts. Simply screw on using the thumbwheel attached to the RAD top bracket. Comes with 360-degree XLR holder 3/8 threaded base to fit on boom poles or stands XLR holder turns in both directions. Screw tightly onto boom pole or stand to lock it into place. Bottom boom mount adaptor and XLR holder only. Other RAD mount parts sold separately.

Read more less

Replacement 360-degree XLR holder attachment for RAD mount boom adaptor. Removable from RAD mount boom adaptor. Unique design only works with RAD Mount boom adaptors. Snugly holds the XLR stem with a thumbwheel screw to tightly lock in place.

Read more less

Pack of 10 Radius brand "light blue" or "Black" cable straps made from high quality TPE silicone-based polymer that is latex free. The cable straps are designed to replace noisy or scratchy hook & loop straps. Perfect for:  Cable Management Organization with Wires/cords Attaching to Boom Poles Attaching to Shock Mounts General cable organisation.  The straps have a "cable-stay" side which locks the strap into place on the cable so it doesn't fall off. Each pack contains 10 cable straps: 5 x straps that are 60mm long 5 x straps that are 100mm long.  Choose between Black or Light Blue. These cable straps are MADE IN THE U.K.

Read more less

Pair of MS Double Mic Clips suitable for mounting 19-21mm mic pairs in mid-side stereo configuration. These clips space MS paired mics at a very close 2.5mm apart and have adjustment screws for lower mic clips to get perfect vertical alignment. The clips come with safety straps to hold both mics in place, as well as a pair of 8mm inserts for holding MZL or Lemo connectors in the rear mic clips. The clips come in 2 sizes: MS19 for 19mm diameter microphones and MS20 for 20-21mm microphones. Double mic clips for MS pairs of mics 19-21mm in diameter Can be used on RAD-2 or RAD-3 mounts and inside Mini-ALTO windshield kits  Mic clips have vertical alignment adjustment screws and safety straps to hold both mics in place Comes with a pair of 8mm inserts for use with MZL or Lemo connectors in the rear mic clips MS19 (dark blue colour) Fits: Sennheiser MKH8030/80X0; and other 19mm diameter microphone pairs MS20 (light blue colour) Fits: Schopes CCM MS pairs, CMC1 MS pairs, CMC6 MS pairs, MiniCMIT/CCM pair; and other 20-21mm microphone pairs

Read more less