The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits: AKG C451; AudioTechnica AT4022, BP3600; Beyerdynamic MC930, MC950; DPA 4006A, 4011A, 4015A, 4018A; Neumann KM184; Rode NT5, NT55; Schoeps CMC6 + MK4, MK5 or MK41
Fits other small pencil condenser and instrument microphones 19-22mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps (make sure there is enough room behind the capsule and in front of the mic mount to slide Nimbus on)
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits: AKG C451; AudioTechnica AT4022, BP3600; Beyerdynamic MC930, MC950; DPA 4006A, 4011A, 4015A, 4018A; Neumann KM184; Rode NT5, NT55; Schoeps CMC6 + MK4, MK5 or MK41
Fits other small pencil condenser and instrument microphones 19-22mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps (make sure there is enough room behind the capsule and in front of the mic mount to slide Nimbus on)
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits: Sennheiser MKH20, MKH30, MKH40, MKH50; Sony ECM-MS2
Fits other small pencil condenser and instrument microphones 24-25mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits: Sennheiser MKH20, MKH30, MKH40, MKH50; Sony ECM-MS2
Fits other small pencil condenser and instrument microphones 24-25mm in diameter, with slots less than 5cm from end of mic and that have standard length preamps
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Fits: Sanken CS-M1
Fits other small hypercardioid microphones 19-22mm in diameter, with slots less than 7cm from end of mic and that have standard length preamps
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Made from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Fits older model camera microphones like: Sony ECM-XM1, HDV Z7; JVC MV-P615
Fits other small shotgun microphones 19-22mm in diameter and with slots less than 10cm from end of mic
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Made from high quality acoustic synthetic fur with a porous open cell foam core
Sony ECM-XM1, HDV Z7; JVC MV-P615
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits: Audio-Technica AT875R, BP4073; DPA 4017; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1
Fits other small shotgun microphones 19-22mm in diameter and with slots less than 12cm from end of mic
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Fits: Audio-Technica AT875R, BP4073; DPA 4017; Schoeps MiniCMIT; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1
Fits other small shotgun microphones 19-22mm in diameter and with slots less than 12cm from end of mic
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Made from high quality acoustic syntethic fur with a porous open cell foam core
Audio-Technica AT875R, BP4073; DPA 4017; Schoeps MiniCMIT; Sennheiser MKH8060; Sony ECM-673, ECM-674, ECM-VG1
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each
Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Schoeps CMIT 5 U; Sennheiser MKE600
Fits other small shotgun microphones 19-22mm in diameter and with slots less than 15cm from end of mic
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each
Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits: Audio-Technica AT897, BP4029; Neumann KMR 81 i; Rode NTG-1, NTG-2; Sanken CS-1e, CSS-50; Schoeps CMIT 5 U; Sennheiser MKE600
Fits other small shotgun microphones 19-22mm in diameter and with slots less than 15cm from end of mic
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each
Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits: Rode NTG-3; Sanken CS-3e; Sennheiser ME66 K6, MKH416, MKH418-S; Sony ECM-678, ECM-680S
Fits other shotgun microphones 19-22mm in diameter and with slots less than 18cm from end of mic
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording. Each
Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits: Rode NTG-3; Sanken CS-3e; Sennheiser ME66 K6, MKH416, MKH418-S; Sony ECM-678, ECM-680S
Fits other shotgun microphones 19-22mm in diameter and with slots less than 18cm from end of mic
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits Sennheiser MKH60 and other shotgun microphones 24-25mm in diameter and with slots less than 18cm from end of mic
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits Sennheiser MKH60 and other shotgun microphones 24-25mm in diameter and with slots less than 18cm from end of mic
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Fits many camera microphones like: Sony ECM-XM1, HDV Z7; JVC MV-P615
Fits other small shotgun microphones 19-22mm in diameter and with slots less than 10cm from end of mic
Made in England from high quality acoustic synthetic fur with a porous open cell foam core
