3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Nimbus is a slide-on windscreen made in many sizes to fit shotgun, small condenser and broadcast camera-mounted microphones. It is designed to reduce up to 25dB of wind noise generated from light to moderate winds, whilst maintaining high frequency audio clarity.
The specially designed rubber end caps are made in two diameters to fit snugly around 19-22mm and 24-25mm microphones, preventing wind from entering behind the capsule. The Nimbus windshields are also the first slip-on style windscreens to incorporate small "pepper pot" hole openings on the rear end caps to provide fuller acoustic transparency for the microphone. This unique feature diminishes polar pattern distortion and adds extra clarity when recording.
Each Nimbus is made using a porous open cell foam internal core and is available in grey or black synthetic fur.
Reduces up to 25dB of wind noise whilst maintaining high frequency audio clarity
Fits: Sanken CS-M1
Fits other small hypercardioid microphones 19-22mm in diameter, with slots less than 7cm from end of mic and that have standard length preamps
Unique "pepper pot" end cap design reduces polar pattern distortion and adds more audio transparency
Made from high quality acoustic synthetic fur with a porous open cell foam core
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
In an attempt to lower our wastage, we are now selling bags of fur off cuts. Each bag comes with a variety of fur, at different lengths and sizes. These would be ideal for cutting up and using for lavalier coverage.
Mixed bags of fur of cuts may include:
Long pile grey fur
shorter pile dark grey fur
10mm black/grey lav fur
Multi pile black fur
All sizes of fur are varied as they are off cuts. LIMITED STOCK AVAILABLE
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Radius Windcovers are made from a high quality, multi-piled synthetic acoustic fur. Each windcover is lined with a smooth internal lining, that gives additional wind protection.
Key Features:
Each windcover comes with 2 snap fasteners to seal the windshield in.
The windcover slips under the suspension.
We offer Fur Windcovers for the Cinela Cosi in a range of sizes: X Large - (Cosi-XL-19)
Large - (Cosi-L-19 4017C , Cosi-L-20 CMC, Cosi-L-21 Mini CMIT, Cosi-L-CMS50, Cosi-L-8060, Cosi-L-8060-MZF, Cosi-L-MKH50)Medium - (Cosi-M-19, Cosi-M-22a, Cosi-M-22b)
Small - (Cosi-S-19, Cosi-s-CCM)X Small - (Cosi-XS-CMC1U, Cosi-XS-CMC1L, Cosi-XS-19)
You can now find more fur wind protection solutions for Cinela, Rode Blimps and Portable recorder/On Camera microphones.
If you can't find what you're looking for, please contact us directly for custom orders. We are happy to take requests for different kinds of custom windcovers using different materials, in different colors and with unbranded / your branded labels. Minimum order quantities for customer orders, certain materials and sizes may be applicable.
Disclaimer: This item is not intended to replace the fitted fur supplied to the COSI, but instead for extra protection in extreme high wind conditions. When using multiple layers of fur, it may impact the HF performance and handling noise of the COSI’s suspension. Variants of this product are sold for use with products manufactured by: Sennheiser Electronic Gmbh & Co, Shure Inc. Røde Microphones, Rycote Microphone Windshields Ltd, Cinela, DPA Microphones. Any reference to the products name, design and/or trademark is only intended to identify compatibility. Radius windshields is not sponsored by, connected to or affiliated with and share no interest, including any licence, with the aforementioned companies/corporations.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Radius windcovers are made from our high-quality synthetic acoustic fur and come with a smooth internal lining and draw string. The windcovers come in a range of standard sizes to specifically fit a variety of brands' windshield blimps as replacement windcovers.
Key Features:
The windcover has been carefully designed to cover the full suspension using a drawstring to pull it to the boom pole/handle.
The lining allows you to slip the windcover on with ease.
High quality multi-pile fur, tried and tested in extreme high wind conditions.
You can now find more fur wind protection solutions for Rycote, Cinela Blimps and Portable recorder/On Camera microphones.
If you can't find what you're looking for, please contact us directly for custom orders. We are happy to take requests for different kinds of custom windcovers using different materials, in different colours and with unbranded / your branded labels. Minimum order quantities for customer orders, certain materials and sizes may be applicable.
Disclaimer: Variants of this product are sold for use with products manufactured by: Sennheiser Electronic Gmbh & Co, Shure Inc. Røde Microphones, Rycote Microphone Windshields Ltd, Cinela, DPA Microphones. Any reference to the products name, design and/or trademark is only intended to identify compatibility. Radius windshields is not sponsored by, connected to or affiliated with and share no interest, including any licence, with the aforementioned companies/corporations.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Radius windcovers are made from our high-quality synthetic acoustic fur and come with a smooth internal lining and draw string. The windcovers come in a range of standard sizes to specifically fit a variety of brands' windshield blimps as replacement windcovers.
Key Features:
The windcover has been carefully designed to cover the full suspension using a drawstring to pull it to the boom pole/handle.
The lining allows you to slip the windcover on with ease.
High quality multi-pile fur, tried and tested in extreme high wind conditions.
If you can't find what you're looking for, please contact us directly for custom orders. We are happy to take requests for different kinds of custom windcovers using different materials, in different colours and with unbranded / your branded labels. Minimum order quantities for customer orders, certain materials and sizes may be applicable.Variants of this product are sold for use with products manufactured by: Sennheiser Electronic Gmbh & Co, Shure Inc. Røde Microphones, Rycote Microphone Windshields Ltd, Cinela, DPA Microphones. Any reference to the products name, design and/or trademark is only intended to identify compatibility. Radius windshields is not sponsored by, connected to or affiliated with and share no interest, including any licence, with the aforementioned companies/corporations.
Variants of this product are sold for use with products manufactured by: Sennheiser Electronic Gmbh & Co, Shure Inc. Røde Microphones, Rycote Microphone Windshields Ltd, Cinela, DPA Microphones. Any reference to the products name, design and/or trademark is only intended to identify compatibility. Radius windshields is not sponsored by, connected to or affiliated with and share no interest, including any licence, with the aforementioned companies/corporations.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Radius windcovers are made from our high-quality synthetic acoustic fur and come with a smooth internal lining and draw string. The windcovers come in a range of standard sizes to specifically fit a variety of brands' windshield blimps as replacement windcovers.
Key Features:
The windcover has been carefully designed to cover the whole Rycote Baby Ballgag.
The lining allows you to slip the windcover on with ease.
High quality multi-pile fur, tried and tested in extreme high wind conditions.
If you can't find what you're looking for, please contact us directly for custom orders. We are happy to take requests for different kinds of custom windcovers using different materials, in different colours and with unbranded / your branded labels. Minimum order quantities for customer orders, certain materials and sizes may be applicable.
Disclaimer: Variants of this product are sold for use with products manufactured by: Sennheiser Electronic Gmbh & Co, Shure Inc. Røde Microphones, Rycote Microphone Windshields Ltd, Cinela, DPA Microphones. Any reference to the products name, design and/or trademark is only intended to identify compatibility. Radius windshields is not sponsored by, connected to or affiliated with and share no interest, including any licence, with the aforementioned companies/corporations.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Radius windcovers are made from our high-quality synthetic acoustic fur and come with a smooth internal lining and draw string. The windcovers come in a range of standard sizes to specifically fit a variety of brands' windshield blimps as replacement windcovers.
Key Features:
The windcover has been carefully designed to cover the full suspension using a drawstring to pull it to the boom pole/handle.
The lining allows you to slip the windcover on with ease.
High quality multi-pile fur, tried and tested in extreme high wind conditions.
If you can't find what you're looking for, please contact us directly for custom orders. We are happy to take requests for different kinds of custom windcovers using different materials, in different colours and with unbranded / your branded labels. Minimum order quantities for customer orders, certain materials and sizes may be applicable.All sizes are available below
Disclaimer: Variants of this product are sold for use with products manufactured by: Sennheiser Electronic Gmbh & Co, Shure Inc. Røde Microphones, Rycote Microphone Windshields Ltd, Cinela, DPA Microphones. Any reference to the products name, design and/or trademark is only intended to identify compatibility. Radius windshields is not sponsored by, connected to or affiliated with and share no interest, including any licence, with the aforementioned companies/corporations.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Large Hole Urchin Lav windshields are made to use with lavalier mics placed on the outside of clothing using a clip or other fixture.
The Large Hole Urchin fur covers are sized to firmly fit over mics like the DPA 4060, Voice Technologies VT506 Series & Countryman B3.
They have a unique blue band which holds them firmly into place, taking away the risk of them slipping off. You can choose from a SINGLE pack or a PAIR.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
Radius lavalier mic foams are made in the U.K. from high quality acoustic foam and protect against light wind and plosives. The foams come in a pack of 5 and fit most small lavalier mics 4.5-6mm in diameter.
Compatible with: Countryman B3, Countryman EMW, DPA 4060, Sony ECM-77B, Sennheiser MKE 2 and other similar sized lav mics
Foams are made in the United Kingdom using a semi-open cell material that is also resistant to UV and moisture
Mic foams protect against plosives and light wind noise
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
Radius mic bands are a handy way to add a soft, silent and specific "stopping point" for slip-on windshields or foam mic gags. The bands can also be used to cover mic body switches & XLR connections and creating a moisture barrier, instead of wrapping the mic in electrical tape.
The mic bands come in packs of black and multi-colour, the colours being an easy way to visually identify different mics from a distance. The mic bands are made from high quality TPE silicone (latex free). MADE IN THE U.K.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
Radius Mic Flags are premium, lightweight and virtually indestructible. They are available in Triangle or Square shape and come in Black or White colours. The mic flags features "convex" sides - the slight radius provides a superior visual on-screen look and makes your logo pop.Internal rubber vanes hold and secure the microphone for a "non-slip" fit. The logo area fits industry standard square and rectangular shaped printing labels.
The mic flags have a matte non-reflective finish on top and bottom. The flags fit handheld interview and reporter microphones from 19mm up to 38mm in diameter (remove alternating rubber vanes for microphones 32-38mm).
The mic flags are moulded from a custom combination of polymer materials for long-lasting use. The white coloured mic flags will NOT "yellow" over time from UV exposure.
MADE IN THE U.K.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Mini Lav Urchin windshields are made to use with lavalier mics, placed on the outside or under clothing, using a clip or other fixture. These Mini Urchins are small in profile (Approx. 20mm in size). The Urchin fur covers are sized to firmly fit over mics like the SANKEN COS-11 and DPA 6060. They have a unique blue band which holds them firmly into place, eliminating the risk of your lav sliding off. Colour options: Black, Grey or White
Each Lav Urchin is sold as a SINGLE pack or as a PAIR.
If you're looking for a solution for the DPA 4060 or larger microphones, check out our Large Hole Lav Urchin.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
These small Radius Mini Windcovers are made from high quality synthetic acoustic fur to specifically fit over the small diameter Lom Uši, FEL Clippy and Oaka Verdi microphones.
These windcovers have an internal foam to block out unwanted wind noise, while maintaining acoustic transparency of high frequencies. Mini windcovers are available in black fur colour.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
Our range of Radius Mini Windcovers for on camera microphones are made from high quality synthetic acoustic fur. They are individually made to specifically fit over the microphones they are sized for. These windcovers block out unwanted wind noise, while maintaining acoustic transparency of high frequencies such as speech. Mini wind covers come in black fur colour.
Individually made to fit each size of on camera microphone
Blocks wind noise while maintaining higher frequencies in recordings such as speech
Made from black colour synthetic acoustic fur
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
Our range of Radius Mini Windcovers for portable recorders are made from high quality synthetic acoustic fur. They are individually made to specifically fit over the recorder microphones they are sized for -- both in the X/Y and A/B configurations.
These wind covers have an internal layer of acoustic foam sewn inside so they maintain their shape and create a pocket of still air around the microphones. They also have a tacky elastic lining inside the bottom to allow the wind covers to safely and securely stay in place when using, whilst also allowing as much of the recorder screen or dials to be visible. Mini wind covers come in black fur colour.
Individually made to fit each portable recorder
Internal foam lining maintains its shape and creates a pocket of still air
Tacky elastic base grips recorder safely and securely so it won't fall off
Works with mics in X/Y or A/B configurations
Made from black colour synthetic acoustic fur
We offer Mini Fur Windcovers for Sony PCM A10, Sony PCM D50, Sony PCM M10 & Sony PCM D100.
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
Our range of Radius Mini Windcovers for portable recorders are made from high quality synthetic acoustic fur. They are individually made to specifically fit over the recorder microphones they are sized for -- both in the X/Y and A/B configurations.
These windcovers have an internal layer of acoustic foam sewn inside so they maintain their shape and create a pocket of still air around the microphones. They also have a tacky elastic lining inside the bottom to allow the windcovers to safely and securely stay in place when using, whilst also allowing as much of the recorder screen or dials to be visible. Mini windcovers come in black fur colour.
Individually made to fit each specific size of recorder
Internal foam lining maintains its shape and creates a pocket of still air
Tacky elastic base grips recorder safely and securely so it won't fall off
Works with mics in X/Y or A/B configurations
Made from black colour synthetic acoustic fur
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
Our range of Radius Mini Windcovers for portable recorders are made from high quality synthetic acoustic fur. They are individually made to specifically fit over the recorder microphones they are sized for -- both in the X/Y and A/B configurations.
These wind covers have an internal layer of acoustic foam sewn inside so they maintain their shape and create a pocket of still air around the microphones. They also have a tacky elastic lining inside the bottom to allow the wind covers to safely and securely stay in place when using, whilst also allowing as much of the recorder screen or dials to be visible. Mini wind covers come in black fur colour.
Individually made to fit each portable recorder
Internal foam lining maintains its shape and creates a pocket of still air
Tacky elastic base grips recorder safely and securely so it won't fall off
Works with mics in X/Y or A/B configurations
Made from black colour synthetic acoustic fur
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Mini-ALTO & RAD-2 Kit is a compact and versatile microphone windshield and shock mounting system for location sound professionals. It features the award winning RAD shock mount for exceptional isolation from handling noise, an ultra-lightweight 2-part magnetic "pod" windshield that can be fitted/unfitted in seconds and a removable fur cover for added wind protection.
The Mini-ALTO has been designed to be fast and easy-to-use with almost all small condenser, short shotgun and standard shotgun sized microphones. With a diameter of just 85mm, the Mini-ALTO is the smallest "full-coverage" zeppelin windshield available in the professional audio recording industry. Even at this size, the Mini-ALTO will achieve wind reduction for up to -40dB with its included fur cover, which is comparable to larger pill-shaped windshields. The Mini-ALTO windshields come in full kits which include the windshield, a RAD-2 Mount, spare hoops with different suspension firmness, a fur windcover, a "smiley face" adaptor and a magnetic stowage holder for the windshield with a caribiner clip. The full kits are available in versions with and without custom fitted XLR cables. Made in the U.K.
Included in kit: Mini-ALTO 115 size windshield, RAD-2 Shock Mount with 4 pairs of suspension hoops (extra soft, soft, standard, extra firm), Fur Windcover, Smiley Face Adaptor, Magnetic Windshield Stowage Holder with Carabiner Clip, a pair of RAD Cable Straps and (optional) 3-Pin XLR cable.
'Fits: DPA 4018C; Neumann KM 100 Series; Schoeps CMC1 Series; Sennheiser MKH8020; MKH8030; MKH8040; MKH8050
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Mini-ALTO Windshield 115 Add-On Kit is made to be fitted on top of any existing RAD-1, RAD-2 or RAD-3 shock mount for small condenser microphones. This kit includes an ultra-lightweight 2-part magnetic "pod" windshield, a Smiley Face Adaptor that connects to the RAD shock mount, a removable fur windcover, and a magnetic Windshield Stowage Holder with Carabiner Clip.
The Mini-ALTO windshield system has been designed to be fast and easy-to-use with almost all small condenser, short shotgun and standard shotgun sized microphones. With a diameter of just 85mm, the Mini-ALTO is the smallest "full-coverage" zeppelin windshield available in the professional audio recording industry. Even at this size, the Mini-ALTO will achieve wind reduction for up to -40dB with its included fur cover, which is comparable to larger pill-shaped windshields.
Included in kit: Mini-ALTO 115 size windshield, Fur Windcover, Smiley Face Adaptor, Magnetic Windshield Stowage Holder with Carabiner Clip and a Pair of RAD Cable Straps
Fits: DPA 4018C; Neumann KM 100 Series; Schoeps CMC1 Series; Sennheiser MKH8020; MKH8030; MKH8040; MKH8050
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Mini-ALTO & RAD-2 Kit is a compact and versatile microphone windshield and shock mounting system for location sound professionals. It features the award winning RAD shock mount for exceptional isolation from handling noise, an ultra-lightweight 2-part magnetic "pod" windshield that can be fitted/unfitted in seconds and a removable fur cover for added wind protection.
The Mini-ALTO has been designed to be fast and easy-to-use with almost all small condenser, short shotgun and standard shotgun sized microphones. With a diameter of just 85mm, the Mini-ALTO is the smallest "full-coverage" zeppelin windshield available in the professional audio recording industry. Even at this size, the Mini-ALTO will achieve wind reduction for up to -40dB with its included fur cover, which is comparable to larger pill-shaped windshields. The Mini-ALTO windshields come in full kits which include the windshield, a RAD-2 Mount, spare hoops with different suspension firmness, a fur windcover, a "smiley face" adaptor and a magnetic stowage holder for the windshield with a caribiner clip. The full kits are available in versions with and without custom fitted XLR cables. Made in the U.K.
Included in kit: Mini-ALTO 180 size windshield, RAD-2 Shock Mount with 4 pairs of suspension hoops (extra soft, soft, standard, extra firm), Fur Windcover, Smiley Face Adaptor, Magnetic Windshield Stowage Holder with Carabiner Clip, a pair of RAD Cable Straps and (optional) 3-Pin XLR cable.
Fits: DPA4017C; Neumann KM 184; Rode NT5; Sanken CS-M1, CMS-50; Schoeps CMC6 Series; CMD42/MK41; MiniCMIT; CMC1U-KMIT; Sennheiser MKH50
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Mini-ALTO Windshield 180 Add-On Kit is made to be fitted on top of any existing RAD-1, RAD-2 or RAD-3 shock mount for small condenser microphones. This kit includes an ultra-lightweight 2-part magnetic "pod" windshield, a Smiley Face Adaptor that connects to the RAD shock mount, a removable fur windcover, and a magnetic Windshield Stowage Holder with Carabiner Clip.
The Mini-ALTO windshield system has been designed to be fast and easy-to-use with almost all small condenser, short shotgun and standard shotgun sized microphones. With a diameter of just 85mm, the Mini-ALTO is the smallest "full-coverage" zeppelin windshield available in the professional audio recording industry. Even at this size, the Mini-ALTO will achieve wind reduction for up to -40dB with its included fur cover, which is comparable to larger pill-shaped windshields.
Included in kit: Mini-ALTO 180 size windshield, Fur Windcover, Smiley Face Adaptor, Magnetic Windshield Stowage Holder with Carabiner Clip and a Pair of RAD Cable Straps
Fits: DPA4017C; Neumann KM 184; Rode NT5; Sanken CS-M1, CMS-50; Schoeps CMC6 Series; CMD42/MK41; MiniCMIT; CMC1U-KMIT; Sennheiser MKH50
3-5 Day Delivery
In stock items typically ship within 3-5 days. Items not in stock typically ship within 5-10 days.
The Mini-ALTO & RAD-2 Kit is a compact and versatile microphone windshield and shock mounting system for location sound professionals. It features the award winning RAD shock mount for exceptional isolation from handling noise, an ultra-lightweight 2-part magnetic "pod" windshield that can be fitted/unfitted in seconds and a removable fur cover for added wind protection.
The Mini-ALTO has been designed to be fast and easy-to-use with almost all small condenser, short shotgun and standard shotgun sized microphones. With a diameter of just 85mm, the Mini-ALTO is the smallest "full-coverage" zeppelin windshield available in the professional audio recording industry. Even at this size, the Mini-ALTO will achieve wind reduction for up to -40dB with its included fur cover, which is comparable to larger pill-shaped windshields. The Mini-ALTO windshields come in full kits which include the windshield, a RAD-2 Mount, spare hoops with different suspension firmness, a fur windcover, a "smiley face" adaptor and a magnetic stowage holder for the windshield with a caribiner clip. The full kits are available in versions with and without custom fitted XLR cables. Made in the U.K.
Included in kit: Mini-ALTO 210 size windshield, RAD-2 Shock Mount with 4 pairs of suspension hoops (extra soft, soft, standard, extra firm), Fur Windcover, Smiley Face Adaptor, Magnetic Windshield Stowage Holder with Carabiner Clip, a pair of RAD Cable Straps and (optional) 3-Pin XLR cable.
Fits: DPA 2017, Sanken CS-1e, Sennheiser MKH8060
